Skip to content
All resources

Testing, quality and handling

Peptide Isoelectric Point and Net Charge: What pI Predicts and What It Does Not

NB

By

· 10 min read

A summary of published research, with citations. It states no amount, schedule or route, and makes no claim about what this compound does in a person. Supplied for laboratory research use only.

On this page · 7 sections
  1. How is pI calculated from a sequence?
  2. What does net charge do at a given pH?
  3. Worked examples from this catalogue
  4. Why do peptides disappear onto glass and plastic?
  5. How does charge govern chromatography?
  6. What pI does not tell you
  7. Frequently asked questions

A peptide's isoelectric point, pI, is the pH at which its positive and negative charges cancel and its net charge is zero. It follows from the sequence: the ionisable side chains of aspartate, glutamate, histidine, cysteine, tyrosine, lysine and arginine, plus the amino and carboxyl termini, each have a characteristic pKa, and the pI is where their contributions balance. Net charge at a given pH governs solubility, how strongly the peptide sticks to glass and plastic, and how it behaves in chromatography.

An isoelectric focusing gel strip with focused bands on a light box beside a pH meter
Illustration: isoelectric focusing separates molecules by the pH at which they carry no charge.

How is pI calculated from a sequence?

By counting ionisable groups and solving for the pH at which the positives equal the negatives. Each group contributes a fractional charge that depends on how far the pH sits from its pKa, and the calculation walks the pH scale until the sum is zero.

The pKa values used matter. Thurlkill and colleagues measured them by potentiometric titration in blocked alanine pentapeptides — a better model for an unstructured peptide than an isolated amino acid — and reported values including 3.67 for aspartate, 4.25 for glutamate, 6.54 for histidine, 8.55 for cysteine, 9.84 for tyrosine and 10.40 for lysine, with 3.67 for the alpha-carboxyl and 8.00 for the alpha-amino group (PMID 16597822). Several of these differ appreciably from the older values still quoted in textbooks, which is one reason two calculators can disagree about the same sequence.

Prediction tools make the same calculation with their own parameter sets. Bjellqvist and colleagues derived values from the focusing positions of polypeptides in immobilised pH gradients, establishing that the position can be predicted from sequence alone (PMID 8125050). Kozlowski's Isoelectric Point Calculator 2.0 combines machine-learning models with the classical approach and reports a root-mean-square deviation of 0.222 for peptides against 0.405 for the previous generation of methods (PMID 33905510).

That error figure is the honest frame for any computed pI: it is an estimate with a real uncertainty, not a measured property. Folded proteins are worse, because burying a charged group shifts its pKa, sometimes by several units. Pace and colleagues review how far these perturbations go and what they do to stability and solubility (PMID 19164280).

What does net charge do at a given pH?

Three things, all of them practical.

PropertyLow net charge (pH near pI)High net charge (pH far from pI)
Aqueous solubilityLowest — least electrostatic repulsion between moleculesHighest
Aggregation tendencyGreatest, for sequences prone to itReduced by mutual repulsion
Ion-exchange retentionMinimalStrong, on the matrix of opposite sign

The solubility minimum at the pI is the oldest observation in the list and the most consistently useful: molecules that do not repel each other are free to associate. Chi and colleagues' review of physical stability places electrostatic repulsion among the forces governing non-native aggregation, alongside hydrophobic exposure and conformational stability (PMID 14567625). The appearance that results — haze, gel, visible particles — is discussed in why cagrilintide solutions turn cloudy, and aggregation sits among the other routes in peptide degradation pathways.

Worked examples from this catalogue

These are conceptual readings of published sequences, not measurements. Each says which groups are present and what that implies about the direction of the net charge. No concentrations, solvents or preparation steps are given here; the arithmetic of concentration from a weighed mass and a diluent volume is the calculator's job.

KPV — lysine, proline, valine. One lysine side chain plus the amino terminus against one carboxyl terminus. Two basic groups against one acidic one puts the balance point in the basic region, so at neutral pH this tripeptide carries net positive charge.

GHK — glycine, histidine, lysine. A lysine and a histidine side chain, an amino terminus and a carboxyl terminus. Again basic overall, with histidine's pKa near 6.5 meaning its contribution changes sharply across the physiological range — a small pH shift moves this peptide's net charge more than it moves most.

BPC-157 — GEPPPGKPADDAGLV. One lysine against one glutamate and two aspartates, plus the two termini. Acidic groups outnumber basic ones, so the balance point falls on the acidic side and the peptide is net negative at neutral pH.

DSIP — WAGGDASGE. One aspartate, one glutamate, no basic side chains at all. Strongly acidic: this sequence has a low pI and carries net negative charge across most of the usable pH range.

TB-500 fragment — LKKTETQ. Two lysines against one glutamate. Net positive at neutral pH, and the kind of small cationic sequence most prone to the surface losses described below.

Catalogue sequences, formulas and molecular weights on this site are best-effort identifiers that should be checked against an authoritative chemical registry before anyone relies on them. The reasoning above depends only on which ionisable groups a sequence contains, so it is worth exactly as much as the sequence is.

Why do peptides disappear onto glass and plastic?

Because charge and hydrophobicity make them stick to surfaces, and at the concentrations used in research the surface can hold a large fraction of what was put in the tube.

Kristensen and colleagues quantified this for three cationic membrane-active peptides — mastoparan X, melittin and magainin 2 — using analytical HPLC to measure what remained in solution after contact with common glass and plastic containers. At typical experimental concentrations, 90% or more of the peptide could be lost from solution through rapid adsorption to the container walls (PMID 25932639). That is not a rounding error; it is most of the experiment.

Goebel-Stengel and colleagues tested eight radiolabelled endocrine peptides spanning a wide range of net charge, size and modification across untreated and siliconised glass and plastic over 48 hours. Binding capacities differed importantly between surface types, siliconisation decreased recovery, and adding a carrier protein improved it; with the best-suited surface for each peptide and lyophilisation in the tube, recovery exceeded 89% for all of them (PMID 21315060). Their conclusion is the useful one: the behaviour is peptide-specific and unpredictable, so the container has to be chosen empirically rather than assumed.

The mechanism connects back to charge. Borosilicate glass carries negative surface charge at neutral pH, which attracts cationic peptides; untreated polypropylene is hydrophobic, which attracts hydrophobic ones. A peptide that is strongly charged and strongly hydrophobic — the amphipathic ones — has both routes available. General laboratory practice around this is in handling research peptides.

How does charge govern chromatography?

Directly, in ion-exchange, and indirectly everywhere else.

In cation-exchange chromatography the stationary phase is negatively charged and retains positively charged peptides, eluted by raising ionic strength or pH. Anion exchange is the mirror. Retention order follows net charge at the running pH, which is why a separation of closely related peptides is often designed around a pH where their charges differ most.

Isoelectric focusing takes the same principle to its limit: in a stable pH gradient under an electric field, each molecule migrates until it reaches the pH where its net charge is zero and then stops. The Bjellqvist work above is essentially the calibration of that method against sequence (PMID 8125050).

Reverse-phase HPLC, the workhorse for peptide purity, is nominally a hydrophobicity separation — but it is run in acid, typically with trifluoroacetic acid, and that is a charge decision. At low pH the carboxylates are protonated and neutral, and the trifluoroacetate ion pairs with the remaining positive charges, masking them and making the peptide behave more hydrophobically. Why that counter-ion ends up in the final powder is covered in TFA and acetate peptide salts, and what the resulting chromatogram does and does not show is in HPLC and LC-MS testing.

Charge also shapes mass spectrometry. Electrospray produces multiply charged ions by protonating basic sites, so a peptide rich in arginine and lysine gives higher charge states — which matters, because the electron-transfer fragmentation described in peptide sequencing by tandem mass spectrometry needs multiply charged precursors to work at all.

What pI does not tell you

It is a single number summarising a titration curve, and summaries lose things.

It says nothing about the magnitude of charge away from the balance point: two peptides can share a pI while one carries many charges of each sign and the other carries one of each. It says nothing about where the charges sit, and a molecule with its positive residues clustered on one face behaves differently from one with the same residues spread along the chain. It is calculated on an unstructured model, so for anything that folds, local environment shifts the underlying pKa values. And it predicts a solubility minimum, not a solubility: a peptide can be poorly soluble well away from its pI for entirely hydrophobic reasons.

Treat a computed pI as a well-founded first guess about the direction of charge at a given pH, and treat anything that depends on the exact value as something to measure. Nothing here is medical, dosing, or therapeutic guidance.

Frequently asked questions

What does it mean when a peptide is at its isoelectric point? It means the pH is such that its positive and negative charges exactly cancel, so the molecule has no net charge and does not migrate in an electric field. Electrostatic repulsion between molecules is at a minimum there, which is generally where aqueous solubility is lowest and association most likely.

How accurate are online pI calculators? Better than they used to be, and still estimates. A recent calculator reports a root-mean-square deviation of about 0.22 pH units for peptides against measured values, with earlier methods near 0.4. Disagreements between tools usually trace to different pKa parameter sets rather than to different arithmetic.

Does pI predict whether a peptide will dissolve? It predicts where solubility is likely to be worst, not whether a given peptide dissolves. Hydrophobicity, sequence patterns that favour ordered aggregation, concentration and ionic strength all contribute independently, and a strongly hydrophobic peptide can be difficult to dissolve at any pH.

Why do cationic peptides stick to tubes? Because glass and many plastics carry a negative surface charge at neutral pH, so a positively charged peptide is attracted electrostatically, and hydrophobic surfaces add a second route for amphipathic sequences. Published measurements on cationic peptides have found 90% or more lost from solution to container walls at typical working concentrations.

Does the counter-ion change a peptide's pI? No. The pI is a property of the peptide's own ionisable groups. The counter-ion affects the mass of the powder and the pH of a freshly made solution — trifluoroacetate is the conjugate base of a strong acid — but it does not change where the molecule's own charges balance.

Selected Research References

  1. Thurlkill RL, Grimsley GR, Scholtz JM, et al. pK values of the ionizable groups of proteins. Protein Science. 2006;15(5):1214-1218. pubmed.ncbi.nlm.nih.gov/16597822
  2. Pace CN, Grimsley GR, Scholtz JM. Protein ionizable groups: pK values and their contribution to protein stability and solubility. Journal of Biological Chemistry. 2009;284(20):13285-13289. pubmed.ncbi.nlm.nih.gov/19164280
  3. Bjellqvist B, Hughes GJ, Pasquali C, et al. The focusing positions of polypeptides in immobilized pH gradients can be predicted from their amino acid sequences. Electrophoresis. 1993;14(10):1023-1031. pubmed.ncbi.nlm.nih.gov/8125050
  4. Kozlowski LP. IPC 2.0: prediction of isoelectric point and pKa dissociation constants. Nucleic Acids Research. 2021;49(W1):W285-W292. pubmed.ncbi.nlm.nih.gov/33905510
  5. Kristensen K, Henriksen JR, Andresen TL. Adsorption of cationic peptides to solid surfaces of glass and plastic. PLoS One. 2015;10(5):e0122419. pubmed.ncbi.nlm.nih.gov/25932639
  6. Goebel-Stengel M, Stengel A, Taché Y, et al. The importance of using the optimal plasticware and glassware in studies involving peptides. Analytical Biochemistry. 2011;414(1):38-46. pubmed.ncbi.nlm.nih.gov/21315060
  7. Chi EY, Krishnan S, Randolph TW, et al. Physical stability of proteins in aqueous solution: mechanism and driving forces in nonnative protein aggregation. Pharmaceutical Research. 2003;20(9):1325-1336. pubmed.ncbi.nlm.nih.gov/14567625
  8. Hartmann E, Chen Y, Mant CT, et al. Comparison of reversed-phase liquid chromatography and hydrophilic interaction/cation-exchange chromatography for the separation of amphipathic alpha-helical peptides with L- and D-amino acid substitutions in the hydrophilic face. Journal of Chromatography A. 2003;1009(1-2):61-71. pubmed.ncbi.nlm.nih.gov/13677645

All products sold by NovaEvum are for research and laboratory use only. They are not intended for human or animal consumption, diagnosis, treatment, cure, or prevention of any disease.